Top Door China Manufacturer

China Manufacturer

Closer

There are usually two different types of doors in a patient room, a patient room entry door and a patient room bathroom door, which have different design requirements


1- Design of patient room entry door


  1. Materials that are easy to clean and resistant to bacteria, such as antimicrobial coatings or non-porous surfaces, help prevent the spread of infections.
  2. Doors is designed with soundproofing materials to maintain a quieter environment for patient rest and recovery.
  3. A Small flush glass vision panel allow healthcare professionals to check on the patient without entering the room. and The glass is mounted flush (level) with the door surface on both sides.There are no protruding frames or ledges around the glass. offers hygienic, easy-to-clean surfaces
  4. Wide doorways for easy wheelchair or stretcher access.aterials to maintain a quieter environment for patient rest and recovery
  5. Inlay with kick plate and stretch plate,Kick plates protect the bottom portion of the door from damage caused by: Carts, wheelchairs, gurneys Foot traffic (especially when doors are pushed open without using hands); Stretch plates are installed higher up — usually around mid-height — to protect against bumps from:Bed frames IV poles Stretcher handles Equipment handles



2-Design of patient room bathroom door


There are two optional design for patient room bathroom door, Normal swing bathroom door and Sliding bathroom door


Design of patient room swing bathroom door


  1.  The vision panel (usually small and located at eye level) allows staff to check in on patients for safety or emergencies without opening the door.The size and placement of the panel ensure patient dignity is maintained while still allowing quick visual checks.
  2.  Airflow & Ventilation (Louvered Panel) The louvers allow natural airflow, reducing humidity and odors in the bathroom — crucial in spaces that may not have mechanical ventilation.Helps prevent mold and supports better infection control.
  3.  Durability & Hygiene (Steel Door) Steel doors are strong, long-lasting, and resistant to dents or damage from wheelchairs, beds, or carts.Easy to sanitize — perfect for healthcare environments that require strict hygiene.
  4.  This door also inlay with kick plate and stretch plate,Kick plates protect the bottom portion of the door from damage caused by: Carts, wheelchairs, gurneys Foot traffic (especially when doors are pushed open without using hands); Stretch plates are installed higher up — usually around mid-height — to protect against bumps from:Bed frames IV poles Stretcher handles Equipment handles


Design of patient room Sliding bathroom door


  1.  Barn-style sliding doors design is better to avoid blocking access in case of a fall,also can save space and are easier for wheelchair users
  2.  Smooth Sliding Mechanism,Lightweight and easy-glide system
  3.  Wide Clear Opening,Minimum clear width of 32 inches (810 mm); ideally 36 inches (915 mm) for wheelchair access
  4.  Louvered Design at bottom,Provides natural ventilation without compromising privacy,Can help with moisture control in the bathroom
  5.  Locking Mechanism,Accessible privacy lock: easy to operate from the inside with a large lever or button,Emergency release on the outside in case of accidents
  6.  Soft-Close Feature,Prevents slamming and reduces risk of injury
  7.  Quality galvanzied steel cover with anti-bacterial paint



Optional Veneer & Texture

TPC01
TPC01
TPC02
TPC02
TPC03
TPC03
TPC04
TPC04
TPC05
TPC05
TPC06
TPC06
TPC09
TPC09
TPC11
TPC11
TPC13
TPC13
TPC15
TPC15
TPC16
TPC16
TPC17
TPC17
TPC19
TPC19
TPC20
TPC20
TPC22
TPC22
TPC23
TPC23

Optional solid color

RAL 5005 Signal Blue
RAL 5012 Light Blue
RAL 5015 Sky Blue
RAL 6002 Leaf Green
RAL 6001 Emerald Green
RAL 7035 Light Grey
RAL 9010 Pure White
RAL 1015 Light Ivory

Door package and loading for metal door




1. Standard package and loading (weld frame metal door)


The surface is covered with a layer of pvc film, sleeved with bubble wrap, and then packed into a 7-layer corrugated cardboard box and wrapped with strapping tape; the secure packaging can reduce the damage caused by scratches and collisions during on-site handling.





2. Standard package and loading (Knock-down frame metal door)


Same as standard wooden door packaging,door pack with the foam corner and edge protection, the surface of a layer of sponge film, and then put into a cardboard box, wrapped with tape; safe packaging can reduce the damage brought about by scratches and collisions  in the handling process on site

Knock-down packaging reduces the volume of packaging, increases the number of loaded goods, reduces transportation costs, especially for large-size metal doors, both knock-down packaging reduces the weight of a single piece of packaging, which is easy for on-site workers to carry, and reduces the size of the package, which avoids the limitations of the size of the container or the size of the access to the site, which makes it easy to carry through.


https://www.homeindoor.cn/uploads/package/knock-down-door-loading-2.webp



3. Door packing by Wood case and loading


After the standard packaging, and then put each door into the wooden box, usually the wooden box is made of plywood board or particle board, the bottom of the wooden box has a base can be forklift truck work; Obviously the wooden box packaging increases the cost, but it also brings a lot of benefits, 1 . Convenient for loading and unloading 2. Avoiding damage to the product from collision during international transport, especially for doors with glass.





Shipping by air

For door and hardware samples, we usually use air freight to save time, we have a long term cooperation with many international express companies, such as DHL, FEDEX; so they give us competitive shipping price and high quality service.

Shipping by sea

Due to the large volume and weight of the door, usually use sea transportation, our factory is located in Yongkang City, Zhejiang Province, China, the nearest port is the port of Ningbo, followed by the port of Shanghai; from the factory to the port in just 3 hours; sea transportation is very convenient; our factory has more than 20 years of experience in exports; and many shipping companies have long-term cooperation

Shipping by truck

If foreign customers have containers for consolidation in China, we can transport your door by truck to the customer's designated loading location, such as Shenzhen, Qingdao, Shanghai

What is your MOQ?

We have no minimum order quantity and accept orders in any quantity.Whether you need a single door or material for an entire project, we offer affordable product price and shipping to your country


Can door size be customized?

Any size within the maximum size range can be customized,

  •  Maximum width of single door is 1250mm,
  •  Maximum width of double door is 2500mm,
  •  Maximum height is 2800mm.


Can door colors be customized?

Of course,We have a wide range of standard colors to choose from, and we can also produce according to the color card provided by the customer.


Can you provide design drawings for confirmation?

Of course, we can ! Our profesional designer can provide detailed design drawings to confirm the specifications and materials before production.

You can also download reference drawing on our website


Can you supply door hardware?

Of course, we can provide different materials, colors, styles, prices of hardware accessories for customers to choose, where you can one-stop shopping for doors and accessories! Most of our hardware is made in china (chinese brand), We can also supply hardware made by international Top brands (such as Häfele, Dorma), or Equivalent China-made hardware



Welcome inquiry, Contact Us Now !

Home

Whatsapp

Email us

Calling

Message

top